参考文献

［1］HEYWOOD J B. Internal combustion engine fundamentals［M］.New York:McGraw-Hill Publishing, 1988.

［2］NERVA J. An assessment of fuel physical and chemical properties in the combustion of a Diesel spray［D］.Valencia:Universitat Politecnica de Valencia,2013.

［3］VERA-TUDELAW M. An experimental study of the effects of fuel properties on diesel spray processes using blends of single-component fuels［D］.Valencia:Universitat Politecnica de Valencia, 2015.

［4］KAMIMOTO T, KOBAYASHI H. Combustion processes in diesel engines［J］.Progress in Energy and Combustion Science, 1991, 17(2):163-189.

［5］MUSCULUS M P B,MILES P C,PICKETT L M. Conceptual models for partially premixed low-temperature diesel combustion［J］.Progress in Energy and Combustion Science,2013,39:246-283.

［6］NABER J D,SIEBERS D L. Effects of gas density and vaporization on penetration and dispersion of diesel sprays［J］.SAE Paper,1996,105(412):82-111.

［7］RICOU FP,SPALDING DB. Measurements of entrainment by axisymmetrical turbulent jets［J］.Journal of Fluid Mechanics,1961,11:21-32.

［8］SIEBERS D L. Scaling liquid-phase fuel penetration in diesel sprays based on mixing-limited vaporization［J］.SAE Technical Papers,1999,108(3):703-728.

［9］BRUNEAUX G. Combustion structure of free and wall-impinging diesel jets bysimultaneous laser-induced fluorescence of formaldehyde,poly-aromatic hydrocarbons,and hydroxides［J］.International Journal of Engine Research,2008,9(3):249-265.

［10］DEC J E,ESPEY C. Ignition and early soot formation in a DI diesel engine using multiple 2-D imaging diagnostics［J］.SAE Technical Papers,1995,104 (3):853-875.

［11］DEC J E,ESPEY C. Chemiluminescence imaging of autoignition in a DI diesel engine［J］.SAE Technical Papers,1998,724.

［12］PICKETT L M,KOOK S,WILLIAMS T C. Visualization of diesel spray penetration,cool-flame,ignition,gigh-temperature combustion,and soot formation using high-speed imaging［J］.SAE Int. J. Engines,2009,2 (1):439-459.

［13］SKEEN S,MANIN J,PICKETT L M. Visualization of ignition processes in high-pressure sprays with multiple injections of n-dodecane［J］.SAE Int. J. Engines,2015,8 (2):696-715.

［14］SKEEN S,MANIN J,PICKETT L M. Simultaneous formaldehyde PLIF and high-speed schlieren imaging for ignition visualization in high-pressure spray flames［J］.Proceedings of the Combustion Institute,2015,35(3):3167-3174.

［15］DEC J. A conceptual model of DI diesel combustion based on laser-sheet imaging［J］.SAE,1997,412:970873.

［16］HIGGINS B,SIBERS D. Measurement of the flame lift-off location on Dl diesel sprays using OH chemiluminescence［J］.SAE Technical Papers,2001,724.

［17］SIBERS D，HIGGINS B. Flame lift-off on direct-injection diesel sprays under quiescent con ditions [J]. SAE Transactions，2001，110（3）：400-421.

［18］MUSCULUS MP B,LACHAUX T,PICKETT L M,et al.End-of-injection over-mixing and unburned hydrocarbon emissions in low temperature-combustion diesel engines［J］.SAE Technical Papers,2007,724:776-790.

［19］MUSCULUS MP B. Entrainment waves in decelerating transient turbulent jets［J］.Journal of Fluid Mechanics,2009,638 (1):117-140.

［20］KOOK S,PICKETT L M,MUSCULUS MP B.Influence of diesel injection parameters on end-of-injection liquid length recession［J］.SAE Int. J. Engines,2009,2(1):1194-1210.

［21］KNOX B W,GENZALE C L,PICKETT L M,et al. Combustion recession after end of injection in diesel sprays［J］.SAE Int. J. Engines,2015,8(2):679-695.

［22］KNOX B W,GENZALE C L. Effects of end-of-injection transients on combustion recession in diesel sprays［J］.SAE Int. J. Engines,2016,9(2):932-949.

［23］KNOX B W,GENZALE C L. Scaling combustion recession after end of injection in diesel sprays［J］.Combustion and Flame,2017,177:24-36.

［24］BRAVO L,KWEON C. A Review on liquid spray models for diesel engine computational analysis［R］.［S.l.］:Army Research Laboratory,2014.

［25］LINNE M. Imaging in the optically dense regions of a spray:a review of developing techniques［J］.Progress in Energy and Combustion Science,2013,39(5):403-440.

［26］KRŸGER S，GRŸNEFELD G. Droplet velocity and acceleration measurements in dense sprays by laser flow tagging [J]. Applied Physics B，2000，71（4）：611-615.

［27］KRŸGER S，GRŸNEFELD G. Gas - phase velocity field measurements in dense spraysby laser-based flow tagging [J]. Applied Physics B，2000，70（3）：463-466.

［28］SEDARSKY D,BERROCAL E,LINNE M. Numerical analysis of ballistic imaging for revealing liquid breakup in dense sprays［J］.Atomization & Sprays,2010,20(5):407-413.

［29］LINNE M A,PACIARONI M,BERROCAL E,et al. Ballistic imaging of liquid breakup processes in dense sprays［J］.Proceedings of the Combustion Institute,2009,32(2):2147-2161.

［30］LIU Z,IM K S,XIE X,et al.Ultra-fast phase-contrast x-ray imaging of near-nozzle velocity field of high-speed diesel fuel sprays［C］.Ilass.［Sl:sn］2010.

［31］OSTA A R,LEE J,SALLAM K A. Investigating the effect of the injector length/diameter ratio on the primary breakup of liquid jets using x-ray diagnostics［C］.Iclass.［Sl:sn］2009.

［32］PAYRI R,BRACHO G,GOMEZ-ALDARAVI P M,et al. Near field visualization of diesel spray for different nozzle inclination angles in non-vaporizing conditions［J］.Atomization and Sprays,2017,27(3),251-267.

［33］DAHMS R N,MANIN J,PICKETT L M,et al. Understanding high-pressure gas-liquid interface phenomena in Diesel engines［J］.Proceedings of the Combustion Institute,2013,34(1):1667-1675.

［34］MANIN J,BARDI M,PICKET L M,et al. Microscopic investigation of the atomization and mixing processes of diesel sprays injected into high pressure and temperature environments［J］.Fuel,2014,134:531-543.

［35］COGHE A,COSSALI G E. Quantitative optical techniques for dense sprays investigation:a survey［J］.Optics & Lasers in Engineering,2012,50(1):46-56.

［36］REITZ R D. Atomization and other breakup regimes of a liquid jet［D］.Princeton:Princeton University,1978.

［37］BAUMGARTEN C,STEGEMANN J,MERKER G. A new model for cavitation induced primary break-up of diesel sprays［C］.Zaragoza.［Sl:sn］2002.

［38］SOM S,AGGARWAL S K. Effects of primary breakup modeling on spray and combustion characteristics of compression ignition engines［J］.Combustion and Flame,2015,157(6):1179-1193.

［39］JENNY P,ROEKAERTS D,BE ISHUIZEN N. Modeling of turbulent dilute spray combustion［J］.Progress in Energy & Combustion Science,2012,38(6).846-887.

［40］WEBER C. Zum zerfall eine sflssigkeitsstrahles [J]. ZAMM-Journal of Applied Mathemat-ics and Mechanics / Zeitschrift fr Angewandte Mathematik und Mechanik，1931，11（2）：136-154.

［41］ZEOLI N,GU S. Numerical modelling of droplet break-up for gas atomization［J］.Computational Materials Science,2007,38(2):282-292.

［42］ARCOUMANIS C,KAMIMOTO T. Flow and combustion in reciprocating engines［M］.Berlin:Springer Berlin Heidelberg,2009.

［43］SIEBERS D L. Liquid-phase fuel penetration in diesel sprays［C］.International Congress & Exposition.［Sl:sn］1998.

［44］HULST H. Light scattering by small particles［J］.Physics Today,1957,10(12).

［45］BOHREN C F,HUFFMAN D R. Absorption and scattering of light by small particles［M］.Philadelphia:The pennsylvania State University,1983.

［46］KOOK S，PICKETT L M. Liquid length and vapor penetration of conventional，fischer-trop-sch，coal-derived，and surrogate fuel sprays at high-temperature and high-pressure ambi-ent conditions [J]. Fuel，2012，93（1）：539-548.

［47］PASTOR J V,GARCIA-OLIVER J M,NERVA J G,et al. Fuel effect on the liquid-phase penetration of an evaporating spray under transient diesel-like conditions［J］.Fuel,2011,90(11):3369-3381.

［48］PASTOR J V,JOSÉ M,GARCIA-OLIVER,et al. Spray characterization for pure fuel and binary blends under non-reacting conditions［J］.SAE Technical Papers,2014,1.

［49］PAYRI R,GIMENO J,BARDI M,et al. Study liquid length penetration results obtained with a direct acting piezo electric injector［J］.Applied Energy,2013,106:152-162.

［50］BARDI M，PAYRI R，MALBEC LM，et al. Engine combustion network：comparison of spray development，vaporization，and combustion in different combustion vessels [J]. atomization and sprays，2012，22（04）：807-842.

［51］JUNG Y,MANIN J,SKEEN S,et al. Measurement of liquid and vapor penetration of diesel sprays with a variation in spreading angle［J］.SAE Technical Papers,2014,2015(6):375-80.

［52］BARDI M,BRUNEAUX G,MALBEC L M. Study of ECN injectors behavior repeatability with focus on aging effect and soot fluctuations［C］.SAE 2016 World Congress and Exhibition.New York:SAE,2016.

［53］PICKETT L M,JULIEN M,GENZALE C L,et al. Relationship between diesel fuel spray vapor penetration/dispersion and local fuel mixture fraction［J］.SAE International Journal of Engines,2011,4(1):764-799.

［54］HIGGINS B S,MUELLER C J,SIEBERS D L. Measurements of fuel effects on liquid-phase penetration in DI sprays［J］.SAE transactions,1999,108(724):630-643.

［55］BARDI M. Partial needle lift and injection rate shape effect on the formation and combustion of the diesel spray［J］.Physics,2014,563(3):242-251.

［56］DESANTES J M,LOPEZ J J,GARCIA J M,et al. Evaporative diesel spray modeling［J］.atomization and sprays,2007,17(3):193-231.

［57］GARCÍA J M. Aportaciones al estudio del proceso de combustion turbulenta de chorros en motores Diesel de inyeccion directa［D］.Valencia:Universitat Politecnica de Valencia,2004.

［58］PASTOR J V,LÓPEZ J J,GARCÍA J M,et al. A 1D model for the description of mixing-controlled inert diesel sprays［J］.Fuel,2009,87(13):2871-2885.

［59］PASTOR J V,PAYRI R,GARCIA-OLIVER J M,et al. Analysis of transient liquid and vapor phase penetration for diesel sprays under variable injection conditions［J］.Atomization and Sprays,2011,21(6):503-520.

［60］BRUNEAUX G.Liquid and vapor spray structure in high-pressure common rail diesel injection［J］.Atomization and Sprays,2001,11(5):533-556.

［61］PASTOR J V,PAYRI R,GARCIA-OLIVER J M,et al.Schlieren measurements of the ECN-spray a penetration under Inert and Reacting Conditions［C］.SAE Technical Paper.New York:SAE,2012.

［62］PAYRI F,PAYRI R,BARDI M,et al. Engine combustion network:Influence of the gas properties on the spray penetration and spreading angle［J］.Experimental Thermal & Fluid Science,2014,53:236-243.

［63］HIROYASU H,ARAI M. Structures of fuel sprays in diesel engines［C］.International Congress &Exposition.New York:SAE,1990.

［64］DENT J C. A basis for the comparison of various experimental methods for studying spray penetration［C］.International Mid-Year Meeting.［S.l.:s.n.］,1971.

［65］DESANTES J M,PAYRI R,SALVADOR F J. Development and validation of a theoretical model for diesel spray penetration［J］.Fuel,2006,85(7/8):910-917.

［66］WAN Y，PETERS N. Scaling of spray penetration with evaporation [J]. Atomization and Sprays，1999，9（2）：111-132.

［67］PAYRI F,BERMÁDEZ V,PAYRI R,et al. The influence of cavitation on the internal flow and the spray characteristics in diesel injection nozzles［J］.Fuel,2004,83:419 -431.

［68］PASTOR J V,J ARRÈGLE,PALOMARES A. Diesel spray images segmentation using a likelihood ratio test［J］.Applied Optics,2001,40(17):2876-2885.

［69］RANZ W E. Some experiments on orifice sprays［J］.The Canadian Journal of Chemical Engineering,1958,36(4):175-181.

［70］REITZ R D,BRACCO F B. On the dependence of spray angle and other spray parameters on nozzle design and operating conditions［C］.SAE International.New York:SAE,1979.

［71］DESANTES J M,PASTOR J V,PAYRI R,et al. Experimental characterization of internal nozzle flow and diesel spray behavior. Part II:evaporative conditions［J］.Atomization and Sprays,2005,15(5):517-544.

［72］DELACOURT E,DESMET B,BESSON B. Characterization of very high pressure diesel sprays using digital imaging techniques［J］.Fuel,2005,84(7/8):859-867.

［73］MACIAN V,PAYRI R,GARCIA A,et al. Experimental evaluation of the best approach for diesel spray images segmentation［J］.Experimental Techniques,2012,36(6):26-34.

［74］IDICHERIA C A,PICKETT L M. Quantitative mixing measurements in a vaporizing diesel spray by rayleigh imaging［J］.SAE Technical Paper,2007,2007(724):776-790.

［75］EGERMANN J,GöTTLER A,LEIPERTZ A. Application of spontaneous raman scattering for studying the diesel mixture formation process under near-wall conditions［C］.SAE International Fall Fuels & Lubricants Meeting & Exhibition.New York:SAE,2001.

［76］HOFFMANN T,HOTTENBACH P,KOSS H J,et al. Investigation of mixture formation in diesel sprays under quiescent conditions using raman,mie and LIF diagnostics［J］.SAE Technical Paper,2008,2008(724):776-790.

［77］BRUNEAUX G. Mixing process in high pressure diesel jets by normalized laser induced exciplex fluorescence part I:Free Jet［C］.SAE Brasil Fuels & Lubricants Meeting.New York:SAE,2005.

［78］PAYRI F,PASTOR J V,PASTOR J M,et al. Diesel spray analysis by means of planar laser-induced exciplex fluorescence［J］.International Journal of Engine Research,2006,7(1):77-89.

［79］KOSAKA H,KAMIMOTO T. Quantitative measurement of fuel vapor concentration in an unsteady evaporating spray via a 2-D mie-scattering imaging technique［C］.SAE Technical Paper.New York:SAE 1993.

［80］CHRISTOPH E,JOHN E D,LITZINGER T A,et al. Planar laser rayleigh scattering for quantitative vapor-fuel imaging in a diesel jet［J］.Combustion and Flame,1997,109(1):65-86.

［81］RECHE C M. Development of measurement and visualization techniques for characterization of mixing and combustion processes with surrogate fuel [D]. Valencia：Universitat Politecnica de Valencia，2015.

［82］HIGGINS B,SIEBERS D L,ARADI A. Diesel-spray ignition and premixed burn behavior［C］.SAE 2000 World Congress.New York:SAF,2000.

［83］KOSAKA H,DREWES V H,CATALFAMO L,et al. Two-dimensional imaging of formaldehyde formed during the ignition process of a diesel fuel spray［C］.SAE Technical Paper.New York:SAE,2000.

［84］JANSONS M,BRAR A,ESTEFANOUS F,et al. Experimental investigation of single and two-stage ignition in a diesel engine［J］.SAE Technical Papers,2008,724:776-790.

［85］LILLO P M,PICKETT L M,PERSSON H,et al. Diesel spray ignition detection and spatial/temporal correction［J］.SAE International Journal of Engines,2012,5(3):1330-1346.

［86］BENAJES J,PAYRI R,BARDI M,et al. experimental characterization of diesel ignition and lift-off length using a single-hole ECN injector［J］.Applied Thermal Engineering,2013,58(1-2):554-563.

［87］KOSAKA H,AIZAWA T,KAMIMOTO T. Two-dimensional imaging of ignition and soot formation processes in a diesel flame［J］.International Journal of Engine Research,2005,6(1):21-42.

［88］IDICHERIA C A,PICKETT L M. Formaldehyde visualization near lift-off location in a diesel jet［M］.New York:SAE International,2006.

［89］AGGARWAL S K. A review of spray ignition phenomena:present status and future research［J］.Progress in Energy and Combustion science,1998,24(6):565-600.

［90］DEC J E. Advanced compression-ignition engines-understanding the in-cylinder processes［J］.Proceedings of the Combustion Institute,2009,32(2):2727-2742.

［91］PICKETT L M,SIEBERS DENNIS L,IDICHERIA C A. Relationship between ignition processes and the lift-off length of diesel fuel jets［C］.Powertrain & Fluid Systems Conference & Exhibition.［Sl:sn］,2005.

［92］MALBEC L M,EAGLE W E,MUSCULUS M,et al. Influence of injection duration and ambient temperature on the ignition delay in a 2.34L Optical Diesel Engine［J］.SAE International Journal of Engines,2015,9(1):47-70.

［93］FLYNN P F,DURRETT R P,HUNTER G L,et al. Diesel combustion:an integrated view combining laser diagnostics,chemical kinetics,and empirical validation［J］.SAE Technical Papers,1999,108:587-600.

［94］WEI J,ROBERTS W L,FANG T. Spray combustion of jet-a and diesel fuels in a constant volume combustion chamber［J］.Energy Conversion & Management,2015,89:525-540.

［95］VENUGOPAL R,ABRAHAM J. A review of fundamental studies relevant to flame lift-off in diesel jets［J］.SAE International Journal of Engines,2007,116:132-151.

［96］DEC J E,COY E B. OH radical imaging in a DI diesel engine and the structure of the early diffusion flame［J］.SAE Technical Papers,1996,105(3):1127-1148.

［97］DEC J E，CANAAN R E. PLIF imaging of NO formation in a DI diesel engine [J]. SAE In ternational Journal of Engines，1998，107：132-151.

［98］PETERS N. turbulent combustion［J］.Cambridge Monographs on Mechanics. Cambridge University Press,2000,125(3).

［99］SIEBERS D L,HIGGINS B,PICKETT L. Flame lift-off on direct-Injection diesel fuel jets:oxygen concentration effects in-cylinder diesel particulates and NOx control［J］.SAE Technical Papers,2002,01:0890.

［100］SIEBERS D L,HIGGINS B S. Effects of injector conditions on the flame lift-off length of DI diesel sprays［J］. In Thermalfluidynamic Processes in Diesel Engines,2000(9):253-277.

［101］MUSCULUS M P B. Effects of the in-cylinder environment on diffusion flame lift-off in a DI diesel engine［J］.SAE Technical Papers,2003,112(3):314-337.

［102］PAYRI R,VIERA J P,PEI Y,et al. Experimental and numerical study of lift-off length and ignition delay of a two-component diesel surrogate［J］.Fuel,2015,158:957-967.

［103］PAYRI R,VIERA J P,GOPALAKRISHNAN V,et al. The effect of nozzle geometry over ignition delay and flame lift-off of reacting direct-injection sprays for three different fuels［J］.Fuel,2017,199:76-90.

［104］FRANCISCO P,PASTOR J V,JEAN-GUILLAUME N,et al. Lift-off Length and KL extinction measurements of biodiesel and fischer-tropsch fuels under quasi-steady diesel engine conditions［J］.SAE International Journal of Engines,2011,4(2):2278-2297.

［105］MAES N,MEIJER M,DAM N,et al. Characterization of spray a flame structure for parametric variations in ECN constant-volume vessels using chemiluminescence and laser-induced fluorescence［J］.Combustion and Flame,2016,174:138-151.

［106］MENKIEL B.investigation of soot process in an optical diesel engine［D］.Brunel:Brunel University,2012.

［107］TREE D R,SVENSSON K I.soot processes in compression ignition engines［J］.Progress in Energy and Combustion Science,2007,33(3):272-309.

［108］IDICHERIA C A，PICKETT L M. Soot formation in diesel combustion under high-EGR conditions［J］.SAE Technical Paper,2005(01):3834.

［109］PICKETT L M,CATON J A,MUSCULUS M,et al. Evaluation of the equivalence ratio-temperature region of diesel soot precursor formation using a two-stage lagrangian model［J］.International Journal of Engine Research,2006,7(5):349-370.

［110］PICKETT L M,SIEBERS D L.Non-sooting,low flame temperature mixing-controlled di diesel combustion［R］.Office of Scientific & Technical Information Technical Reports,2009,113:614-630.

［111］CENKER E,BRUNEAUX G,PICKETT L,et al. Study of soot formation and oxidation in the engine combustion network (ECN),spray a:effects of ambient temperature and oxygen concentration［J］.Journal of Physical Chemistry A,2013,6(1):352-365.

［112］MIYAMOTO N，OGAWA H，SHIBUYA M，et al. Influence of the molecular structure of hy drocarbon fuels on diesel exhaust emissions [J]. Nihon Kikai Gakkai Ronbunshu B Hen/transactions of the Japan Society of Mechanical Engineers Part B，1994，60（571）：1087-1092.

［113］ULLMAN T,SPREEN K,MASON R.Effects of cetane number on emissions from a prototype 1998 heavy-duty diesel Engine［C］.SAE Technical Paper.New York:SAE,1995.

［114］PICKETT L M,SIEBERS D L. Fuel Effects on Soot Processes of Fuel Jets at DI Diesel Conditions［C］.SAE Technical Paper.New York:SAE,2003.

［115］SVENSSON K I,RICHARDS M J,MACKRORY A J,et al. Fuel composition and molecular structure effects on soot formation in direct-injection flames under diesel engine conditions［J］.SAE Technical Papers,2005,114(3):594-604.

［116］SANGHOON K,PICKETT L M. Effect of fuel volatility and ignition quality on combustion and soot formation at fixed premixing conditions［J］.BBA -Protein Structure,2010,2(2):11-23.

［117］KOOK S,PICKETT L M. Soot volume Fraction and morphology of conventional,fischer-tropsch,coal-derived,and surrogate fuel at diesel conditions［J］.SAE International Journal of Fuels & Lubricants,2012,5(2):647-664.

［118］LACHAUX T,MUSCULUS MARK P B. In-cylinder unburned hydrocarbon visualization during low-temperature compression-ignition engine combustion using formaldehyde PLIF［J］.Proceedings of the Combustion Institute,2007,31(2):2921-2929.

［119］JARRAHBASHI D,KIM S,KNOX B W,et al. Computational analysis of end-of-injection transients and combustion recession［J］.International Journal of Engine Research,2017,18(10).