钎焊手册

封面

版权信息

第3版前言 Preface of the Third Edition

第2版前言 Preface of the Second Edition

第1版前言 Preface of the First Edition

第1章 绪论 Chapter 1 Introduction

1.1 钎焊方法的原理和特点 Princi-ple and Characteristic of Brazing and Soldering Technique

1.2 熔态钎料对固体母材的润湿和铺展 Wetting and Spreading of Molten Filler Metal on a Solid Base Metal

1.3 熔态钎料与固体母材的相互作用 Reaction of Molten Filler with Solid Base Metal

1.4 钎缝中熔态钎料的凝固和钎缝的金相组织 Solidification of Mol-ten Filler Metal in Clearance and the Micrographic Structure of the Fillet

1.5 钎剂、钎料的选择与搭配 Se-lection and Matching of Fluxes with Filler Metals

1.6 钎焊工艺 Technology of Bra-zing and Soldering

参考文献 References

第2章 铝及铝合金的钎焊 Chapter 2 Brazing and Soldering of Aluminum and its Alloys

2.1 概述 Introduction

2.2 铝及铝合金的编号 Designations of Aluminum and its Alloys

2.3 铝及铝合金的理化性能 Physi-cal and Chemical Properties of Aluminum and its Alloys

2.4 铝氧化膜的本质及其在加热时的变化 Nature of Oxide Film on Alu-minum and its Change during Heating

2.5 铝钎剂 Fluxes for Aluminum Brazing and Soldering

2.6 钎焊时铝氧化膜的脱除机制 Re-moval Mechanism of Oxide Film on Aluminum during Brazing

2.7 铝钎料 Brazing Filler Metals and Solders for AluminumAlloys

2.8 铝的复合钎焊材料 Composite Fillers for Aluminum Brazing or Soldering

2.9 铝钎焊中的一些特殊技艺 Some Special Skills in Alumi-num Brazing and Soldering

2.10 铝钎焊的焊前准备和焊后处理 Pre-brazing Preparations and Post-brazing Operations

参考文献 References

第3章 铜和铜合金的钎焊 Chapter 3 Brazing and Soldering of Copper and Copper Alloys

3.1 概述 Introduction

3.2 钎焊性 Brazability and Solder-ability

3.3 钎焊接头间隙 Clearance of Brazed Joint

3.4 软钎料 Solders

3.5 硬钎料 Brazing Filler Metals

3.6 钎剂 Fluxes

3.7 软钎剂 Soldering Fluxes

3.8 硬钎剂 Brazing Fluxes

3.9 表面准备 Surface Preparation

3.10 接头设计 Joint Design

3.11 钎焊方法和工艺 Methods and Technology of Soldering and Brazing

参考文献 References

第4章 电子工业中的软钎焊 Chapter 4 Soldering in Electronic Industry

4.1 电子制造与软钎焊 Electronic Manufacture and Soldering

4.2 软钎焊连接的基本原理 Fun-damental of Soldering

4.3 软钎料合金 Solder Alloys

4.4 软钎剂 Soldering Fluxes

4.5 钎料膏与药芯软钎焊丝 Solder Paste and Flux-cored Solder Wire

4.6 电子组装技术 Electronic As-sembling Technology

4.7 倒装芯片技术 Flip-chip

参考文献 References

第5章 碳钢、铸铁的钎焊 Chapter 5 Brazing and Soldering of Carbon Steels and Cast Iron

5.1 碳钢的钎焊性 Brazability and Solderability of Carbon Steels

5.2 碳钢的表面清理 Surface Prep-aration of Steels

5.3 碳钢的软钎焊 Soldering of Steels

5.4 碳钢的硬钎焊 Brazing of Steels

5.5 钎焊工艺 Technology of Brazing

5.6 铸铁的钎焊 Brazing of Cast Iron

参考文献 References

第6章 不锈钢的钎焊 Chapter 6 Brazing and Soldering of Stainless Steels

6.1 概述 Introduction

6.2 不锈钢的钎焊性 Brazability and Solderability of Stainless Steels

6.3 表面准备 Surface Preparation

6.4 不锈钢的软钎焊 Soldering of Stainless Steels

6.5 不锈钢的硬钎焊 Brazing of Stainless Steels

参考文献 References

第7章 高温合金的钎焊 Chapter 7 Brazing of High Temperature Alloys

7.1 概述 Introduction

7.2 钎焊性 Brazability

7.3 钎料 Brazing Filler Metals

7.4 钎焊工艺 Brazing Technology of High Temperature Alloys

7.5 TD-Ni的钎焊 Brazing of TD- Ni

7.6 瞬态液相连接 Transient Liq-uid Phase Bonding

7.7 大间隙钎焊 Wide-gap Brazing

参考文献 References

第8章 难熔金属钨、钼、钽、铌的钎焊 Chapter 8 Brazing of Refractory Metals：Tungsten，Molybdenum，Tantalum and Niobium

8.1 概述 Introduction

8.2 钨、钼、钽、铌及其合金的性能和牌号 Properties and Desig-nations of Tungsten，Molybde- num，Tantalum，Niobium and its Alloys

8.3 钨、钼、钽、铌的钎焊性 Brazability of Tungsten，Mo-lybdenum，Tantalum and Nio-bium

8.4 难熔金属的焊前准备 Surface Preparation for Brazing Refrac- tory Metals

8.5 难熔金属的钎焊 Brazing of Refractory Metals

8.6 钨、钼、钽、铌钎焊接头的应用Applications of Brazed Joints of Tungsten，Molybdenum，Tan-talum and Niobium

参考文献 References

第9章 钛、锆及其合金的钎焊 Chapter 9 Brazing of Titanium，Zirconium and Their Alloys

9.1 概述 Introduction

9.2 钛、锆及其合金的理化特性及分类 Physical and Chemical Properties and Classifications of Titanium，Zirconium and their Alloys

9.3 钛、锆及其合金钎焊特点 Bra-zing Characteristics of Titani-um，Zirconium and their Alloys

9.4 钎料 Filler Metals

9.5 钎焊方法和设备 Brazing Methods and Equipments

9.6 钎焊前清理和表面准备 Clean- ing and Surface Preparation for Workpiece to be Brazed

9.7 钎剂和保护气氛 Fluxes and Protective Atmospheres

9.8 钛合金与其他材料的钎焊 Brazing of Titanium Alloys to other Materials

9.9 钛合金钎焊技术的发展 Deve-lopments in Brazing Technique of Titanium Alloys

9.10 应用 Applications

参考文献 References

第10章 铍、镁合金的钎焊 Chapter 10 Brazing of Beryllium，Magnesium Alloys

10.1 铍的钎焊 Brazing of Berylli-um

10.2 镁和镁合金的钎焊 Brazing of Magnesium and its Alloys

参考文献 References

第11章 硬质合金的钎焊 Chapter 11 Brazing of Carbides

11.1 概述 Introduction

11.2 硬质合金工具的钎焊 Brazing of Carbide Tools

11.3 硬质合金的钎焊性 Brazabili-ty of Carbides

11.4 钎料与钎剂 Filler Metals and Fluxes